Multiple Layer GPON Optical EDFA Erbium Doped Fiber Amplifier 4*21dB

Erbium-Yterbium-Doped Fiber Amplifier 4*21dB

OLA HSeries 1550nm high power fiber amplifier adopts two-stage amplification, the first stage adopts low-noise EDFA, the second stage adopts high-power EYDFA, the total output optical power can reach 41dBm. It can replace several or dozens of EDFA, which can greatly reduce the cost of network building and maintenance and reduce the space of head-end. Each output port is built in with CWDM to multiplex CATV signal and OLT PON Data flow. The device will play an increasingly important role in the process of continuous extension and expansion of optical fiber network. It provides a high stability but low cost solution for the triple-play and large area coverage of FTTH.

Optional dual fiber inputs, in fact, built-in with a set of complete optical switch system , which can be used as the backup of A and B optical path. When the main optical line fails or lower than the threshold value, the device will automatically switch to the standby optical line to ensure the continuous operating of the device. The product is mainly used in optical fiber ring network or redundant backup network, It is featured in short switching time (< 8ms), low loss (< 0.8dbm ), and can be forced manually switched.

4PORT *21dB output Frequency is the most popular in the market due to its attractive price. It is enough for a small range of area with less than 3000 families.

FEATURES&PARAMETERS:

Diagram:

Installation Instruction:

Erbium Doped Fiber Amplifier 4*21dB

GPON optical EDFA 4*21dB

Multiple Layer GPON optical EDFA 4*21dB

Multiple Layer GPON Optical EDFA Erbium Doped Fiber Amplifier 4*21dB Images